T2-02 - Repeatability of friction and wear of different material pairs at 1000 °C under unidirectional sliding motion
Fabio ALEMANNO, Ducom Instruments Europe B.V., Netherlandsto be confirmed
|
T2-03 - Effect of Fillers on Tribological Properties of EPDM with Hydrogen Exposure
Byeonglyul CHOI, Korea university, Korea (Republic of)
|
T2-04 - Developing an innovative next generation anti-wear
Christelle CHRETIEN, SOLVAY, United States
|
T2-05 - Effects of marine environment on wear mechanisms of polymeric ropes
Henara COSTA, Universidade Federal do Rio Grande, Brazil
|
T2-06 - Effect of strain hardening on the stainless steel abrasive wear resistance
Jose Daniel DE MELLO, Universidade Federal de Uberlandia, Brazil
|
T2-07 - The Fe-C-Cr alloys used for production of working elements of impact crushers
Mateusz DZIUBEK, Wroclaw University of Science and Technology , Poland
|
T2-08 - Sustainable tribological composites through Circular Economy: using recycled carbon fibers as an alternative reinforcement in UHMWPE-based composites
Nazanin EMAMI, Lulea University of Technology , Sweden
|
T2-09 - Laser Impact on Contact Responses of Coated Cemented Carbides
Shiqi FANG, Saarland University, Germany
|
T2-10 - Tribological study of Ni-Cr-5Al2O3 thermal spray coating: A comparison of different post processing techniques
Mayank GARG, Shiv Nadar University, India
|
T2-11 - Effect of distance between grooves on the wear of structured grinding wheels
José GOMES, University of Minho, Portugal
|
T2-12 - A system engineering approach to reduce soot wear
Deepak HALENAHALLY VEEREGOWDA, Ducom Instruments Europe B.V., Netherlands
|
T2-13 - Development of a Tribological Test Routine for TPUs under Water Lubrication
Andreas HAUSBERGER, Polymer Competence Center Leoben GmbH, Austria
|
T2-14 - Assessment of Tribological Properties of Diamond-like Carbon with Ion-beam Chemical Vapor Deposition
Seojun HEO, Gyeongsang National University, Korea (Republic of)
|
T2-26 - Tribology of ta-C, MoS2, Steel and Soft Metals in Vacuum and Ambient Air Conditions
Fabian HÄRTWIG, TU Dresden, Germany
|
T2-15 - Assessment of Friction and Wear Properties of Porous Polyimide Film
Seongsik JEONG, Gyeongsang national university, Korea (Republic of)
|
T2-16 - Effect of Addition of Filler on the Tribological Properties of CF/PEEK Composites
Ramyasree KANCHERLA, EBARA CORPORATION,
|
T2-17 - Image processing by morphological covariance applied to the identification of wear damage in UHMWPE
Vanessa KAPPS, National Institute of Metrology, Quality and Technology, Brazil
|
T2-18 - Effect of local remelting and recycled reinforcement size on abrasive wear of manual arc welded hard-facings
Egidijus KATINAS, Czech University of Life Sciences Prague, Czechia
|
T2-19 - Consideration Factors in Analysis of Wear by FEM
Tae-Hyeong KIM, Yonsei University, Korea (Republic of)
|
T2-20 - Tribological Properties of TiN Coating Lubricated by Polyalphaolefin 8 without and with Carbon Nanotubes
Joanna KOWALCZYK, Kielce University of Technology, Polandto be confirmed
|
T2-21 - The effect of thermal shock on wear resistance of floor composite made of epoxy resin with fine aggregate and concrete substrate
Kamil KRZYWINSKI, Wroclaw University of Science and Technology, Poland
|
T2-23 - High-temperature tribological behavior of sintered B-containing 316L steel
Francisco LANFERDINI SERAFINI, Universidade de Caxias do Sul, Brazil
|
T2-22 - Friction temperature sensitivity of solid lubricants for brake friction materials
Francisco LANFERDINI SERAFINI, Universidade de Caxias do Sul, Brazil
|
T2-24 - The wear coefficient in scratch tests for a heterogeneous microstructure
Arnaldo Oliveira LIMA, Universidade de São Paulo, Brazil
|
T2-25 - Abradable Capped Metallic Foams for Aero-Engine Sealing Clearance Control
Allan LIU, University of Sheffield, United Kingdom
|
T2-27 - Surface temperatures during sliding wear of polypropylene against polyurethane in dry and aqueous environment
Rubson MAÇÃO CAMPOREZ, Federal University of Espírito Santo, Brazil
|
T2-29 - Tribological behaviour of UHMWPE reinforced by metal sulphides under dry sliding conditions
Maksim NIKONOVICH, LTU, Sweden
|
T2-30 - Multiscale and multi-physics characterization of the tribological behavior of a pad-on-rotating disc tribological system considering emergency landing conditions
Serge PENAHERRERA, ONERA, France
|
T2-31 - Abrasive wear of Fe-Cr-C PTA overlays for tillage tools
Giuseppe PINTAUDE, UTFPR, Brazil
|
T2-32 - Using tribological principles for a more sustainable grinding process
Javier RODRIGUEZ , University of Birmingham, United Kingdom
|
T2-33 - Friction properties of hard anodizing and micro-arc oxidation coatings obtained on an aluminum alloy 5086
Louis RODRIGUEZ, Laboratoire Génie de Production, France
|
T2-34 - Titanium-based PVD Coatings for Improved Electrochemical and Tribomechanical Durability in Demanding Environments
Celia ROJO, The University of Sheffield, United Kingdom
|
T2-35 - Influence of microstructure and crystallographic texture on the micro-abrasion resistance of thermomechanical treated duplex stainless steels.
Carlos Alberto ROSA NETO, FEDERAL UNIVERSITY OF ESPIRITO SANTO, Brazil
|
T2-36 - MICRO-SCALE ABRASION MECHANISMS DURING SCRATCH TESTING OF THERMALLY SPRAYED IRON COATINGS
Marcionila SANTOS, Escola Politécnica da Universidade de São Paulo, Brazil
|
T2-37 - Effect of surface roughness of Polyamide 66 against carbon steel S45C on wear properties
Shinya SASAKI, Tokyo University of Science, Japan
|
T2-38 - Influence of swirling cryogenic jets on erosion of AISI 310 stainless steel
César SEDANO, Universidad de Guadalajara, Mexico
|
T2-39 - Tribodynamic Analysis of a Ball Type Constant Velocity Joint
Matthew SIMPSON, Loughborough University, United Kingdom
|
T2-40 - Investigation of Engine Oil Wear by Nuclear Magnetic Resonance
Margarita SKOTNIKOVA , Peter the Great St. Petersburg Polytechnic University, Russian Federation
|
T2-41 - Study of wear mechanisms of UHMWPE/Al2O3/B4C hybrid nanocomposites
Igor SOARES, Federal University of Rio de Janeiro (UFRJ), Brazil
|
T2-42 - Study of the tribological behavior of thermal spray coatings with an interesting potential to substitute to hard chrome plating under different abrasion conditions
Céline TREVISIOL, CETIM, France
|
T2-43 - Micro-abrasive wear of a low-temperature plasma nitrided Inconel 625 superalloy
André TSCHIPTSCHIN, University of São Paulo, Brazil
|
T2-44 - New multiscale polymer composites for water lubricated tribological contacts
Hari VADIVEL, Luleå University of Technology, Sweden
|
T2-45 - Ionic liquids as a new class of lubricants for polymer-steel friction pairs
Lukasz WOJCIECHOWSKI, Poznan University of Technology, Institute of Machines and Motor Vehicles, Poland
|
T2-46 - An insight into the rough surface effect on fretting characteristics of quenched and tempered steel
Amirhossein ZABIHI, Tampere University, Finland
|